Silicone sealant(1088)
Yulong polymer to provide customers with quality products and services
Classification:
Silicone Sealant
Key words:
Silicone Sealant
Product Introduction
This product is a silicone-propylene emulsion type product.The single-component is cured at room temperature, and its water resistance and adhesion have been greatly improved after improvement, which can overcome large displacement in house construction.This product is a non-sagging type, easy to construct, non-toxic and non-polluting, and is a must-have for high-end decoration.This product has high elongation, high elasticity, high whiteness, non-toxic and environmentally friendly, and is suitable for indoor and outdoor decoration.Executive standard: JC/T484-2006
Construction requirements：
1．This product is neutral, non-corrosive and non-polluting.After complete drying, the surface gloss, tensile strength and other properties are comparable to silicone rubber.
2．The adhesive surface must be dry and clean.It should not be used in places that are continuously soaked in water or wet all year round.
3．Prevent rain and flooding before the surface is completely dry o
4．Paints, coatings and all materials that will ooze grease will affect the bonding effect and should not be applied o
5．Light and ventilation are required during the drying and curing process.
Previous Page
Next Page
Recommend products
Neutral silicone sealant(995-1088)
Prefabricated building adhesive(MS309)
Neutral silicone sealant(1088)
Silicone sealant(793)
Demand Message
Shandong Yulong Polymer Technology Co., Ltd.
Address: No.69 Xingyu Road, High-tech Zone, Longkou City, Shandong Province, China
Tel: +86-15066786767
Email: lkyulong1992@163.com