Neutral silicone sealant(2004)
Yulong polymer to provide customers with quality products and services
Classification:
Silicone Sealant
Key words:
Neutral silicone sealant
Product Introduction
It has good bonding strength to glass, metal, stone, concrete, ceramics, and wood.
Main purpose:
It can be widely used in door and window installation, aluminum alloy, aluminum-plastic panel, sun panel, glass curtain wall caulking sealing, and can also be used for general sealing of ceramics, cement and roof.
Construction method:
The bonding and sealing surfaces should be dry, clean, and dense, and should not be stained with oil, dust, moisture, etc.; Cut the opening and tip, and load it into the glue gun for use; use the tip to squeeze the glue directly into the place to be sealed.
Safety instructions
Avoid direct contact with the skin for a long time. If you accidentally splash into your eyes during use, please consult a doctor immediately.Do not approach the source of fire when using, and do not let children touch it to avoid eating by mistake.
Usage restrictions
1.Structural assembly
2.All materials that ooze grease, plasticizers or solvents on the surface, such as the surface of oiled wood
3 .Dense and unventilated parts, because the sealant needs to absorb water vapor from the air to cure
4.Frosted, wet surfaces, places that are continuously soaked in water or wet all year round
5.The surface of the paint may fail to seal due to cracking or peeling of the paint film
6.Places that will come into direct contact with food
7.Places vulnerable to mechanical wear and tear
8.When the surface temperature of the material is lower than 4℃ or higher than 40℃, it is not suitable for construction
9.When bonding cement and concrete substrates, the substrate must be completely dried and maintained for 7 days before construction, otherwise it will affect the bonding effect.
10.During construction under high temperature and humidity in summer and porous substrate conditions, the colloid may bubble.
11.Cannot be used for copper substrates.
Previous Page
Next Page
Recommend products
Demand Message
Shandong Yulong Polymer Technology Co., Ltd.
Address: No.69 Xingyu Road, High-tech Zone, Longkou City, Shandong Province, China
Tel: +86-15066786767
Email: lkyulong1992@163.com